Description
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage ends fail. Failure pressure is registered upon buckle or tab blowout of the free end. The 9009H4 also has the ability to perform vent tests, in which the test is terminated upon the opening of the tab.
Operation
An appropriate set of Change Parts, determined by the end being tested and the test performed, are installed in the unit and the sample clamped in place. When buckle testing or tab blowout testing, a test sequence is initiated and the end is pressurized at a specified rate until it fails; the pressure at which the end failed is indicated on the front-panel mounted digital display. When vent testing, a test sequence is initiated and the end is pressurized to a specified pressure. The pressure is held momentarily, then the tab is opened automatically via the fixture located in the test area.
CHANGE PARTS
This unit requires the use of Change Part 9818. Click Change Part number for further information.
Features
-
3 FUNCTIONAL TESTS IN ONE UNIT
-
SPC IN CONTROL RATED
-
FREE END FAILURE RESEMBLES SEAMED END FAILURE
-
MICROPROCESSOR CONTROL OF TEST
-
HIGH RESOLUTION DIGITAL DISPLAY
-
RS-232 COMMUNICATIONS CAPABILITY
-
QUICK CHANGE OF TEST PARAMETERS FOR OPERATOR EASE OF USE
-
QUICK-MOUNT CHANGE PARTS
-
EXTENSIVE SAFETY FEATURES
-
AUXILIARY ANALOG OUTPUT (OPTIONAL)